PWL Type 1 - 32 Ton Light Duty Works Electric Single Girder Overhead Crane for Warehouses

Chapter 1, Administration - Florida Building

b'421.2.1.2 The Guidelines for Design and Construction of Health Care Facilities (the Guidelines), Chapters 1-6, and Sections 9.5, 9.30.B, 9.31, and 9.32 Part 1 General and Part 3 Ambulatory Care Facilities incorporated by reference and obtainable from the American Institute of Architects, 1735 New York Ave., N.W., Washington, D.C. 20006-5292 ...'

EOT crane | Crane (Machine) | Elevator

b'1) CMAA 70 Specification for Top Running Bridge & Gantry Type Multiple Girder Electric Overhead Traveling Cranes AGMA ASME HST-4 ASME Y 14.1 ASME B18.2.2 ASME B30.2 American Gear Manufacturers Association Performance Standard for Overhead Electric W ire Rope Hoists Decimal Inch Drawing Sheet Size and Format Square and Hex Nuts Overhead and ...'

GENERAL

b'The septic tank shall be designed with a length-to-width ratio of 2:1 to 3:1 and the liquid depth should be between 1.2 m and 1.8m. This depth is determined by the outlet pipe invert elevation. If not specified in the contract, the septic tank shall be sized based on the average daily demand of 190 liters/capita/day, plus an additional 100% for ...'

Chapter 1, Administration - Florida Building

b'421.2.1.2 The Guidelines for Design and Construction of Health Care Facilities (the Guidelines), Chapters 1-6, and Sections 9.5, 9.30.B, 9.31, and 9.32 Part 1 General and Part 3 Ambulatory Care Facilities incorporated by reference and obtainable from the American Institute of Architects, 1735 New York Ave., N.W., Washington, D.C. 20006-5292 ...'

RussianGost|Official Regulatory Library - GOST 12.2.003-91

b'TU 24-09-613-84: Electric overhead traveling cranes with a lifting capacity of 5 tons of lightweight construction with electric hoist. TU 3615-018-00217320-2006: Spherical tanks. Technical specifications. TU 3615-132-00220302-2008: Ball tanks for liquefied petroleum gases. Specifications'

GENERAL

b'The septic tank shall be designed with a length-to-width ratio of 2:1 to 3:1 and the liquid depth should be between 1.2 m and 1.8m. This depth is determined by the outlet pipe invert elevation. If not specified in the contract, the septic tank shall be sized based on the average daily demand of 190 liters/capita/day, plus an additional 100% for ...'

Download: Free Safety Program | OSHA Fall Protection ...

b'4. The squares shall be set only 5 feet apart with regard to medium duty scaffolds, and only 8 feet apart with regard to light duty scaffolds. Bracing 1 times 8 inches, extending from the bottom of square to the the top of next square, shall be provided with both front and rear sides from the scaffold. 5.'

Internal 2013 | Lighting | Electrical Substation

b'50 50 +0.3 45.0 0.4 0.6 TABLE IV Ordinary Clips or Girder Clips [Clause 5.2.2(vi] Size of Conduit Width Thickness (1) 20 mm & 25 mm 19 mm 20 SWG (0.9144 mm) (2) 32 mm & above 25 mm 18 SWG (1.219 mm) 54 CHAPTER 6 TRUNKING CABLE MANAGEMENT SYSTEM 6.0 Scope This chapter covers the requirements of mini trunking (casing wiring) and adaptable ...'