Single Boom Bridge Crane Swl 5 ton Crane

SAFE WORKING LOAD & SAFETY FACTOR | RLS HUMAN CARE

b'Aug 27, 2019 \xc2\xb7 For hoist, lift, cranes, etc., Safe working Load recommended by the manufacturer. Safe Working Load (SWL) of any mobile crane depends on the operator\xe2\x80\x99s skill, condition of the ground, boom length, the radius of rotation while lifting the load, the inclination of the boom \xe2\x80\xa6'

Single girder overhead crane price 5 ton - Buy electric ...

b'Single girder bridge crane is a kind of light and small overhead lifting crane. 1. Widely use for lifting and transferring goods in factories, warehouses, maintenance workshop, material yard and so on.. 2. Prohibited to use the equipment in the combustible, \xe2\x80\xa6'

5 Ton Jib Crane Price - Ideal & Competitive - Aicrane Jib ...

b'Features of 5 tons Jib Crane. 1. Both heavy duty jib crane and pillar mounted jib crane can reach a maximum rotation of 360 degree. 2. Wall mounted jib crane for 5 ton turn half-circle (180 degree). 3. Wall traveling jib crane for 5 ton carry loads for three direction, such as horizontal motion of the whole crane, hoist moves along I-beam and hoist act vertically.'

Overhead Bridge Cranes Pricing ... - Texas Overhead Cranes

b'1. 5 Ton - 47 ft span - TRSG Crane in Customer Supplied - 150 ft X 50 ft building with 24 ft Eave Ht. Pricing Includes: 5 Ton - 47 ft Span - Top-Running Single-Beam- Girder Crane with 20/3.3 Fpm. 2-Spd. Hoisting, 20 FaceTime. of Available Lift on Drum, 60/15 Fpm. 2-Spd. Trolley, and 100/20 Fpm. VFD - Controlled Bridge \xe2\x80\xa6'

Ace Industries Cranes | Ace Industries

b'Top Running Single Girder. A top running single girder crane is the most common type of bridge crane system as this configuration typically meets the lifting demands and facility space requirements for most customers. 0.5 to 15 ton capacities; 10 to 100+ ft. spans; Underhung monorail hoist and trolley attached to the bottom of the bridge beam'

INSTRUCTIONS AND PARTS LIST CRANE BRIDGE KITS

b'CRANE BRIDGE KITS 1/4 THRU 5 TON PUSH, HAND GEARED AND MOTOR DRIVEN ... These crane bridge kits contain all parts needed, except the bridge beam, cross shaft (when required), and the trolley stop angles to build under running, single girder crane bridges in rated loads and spans (center-to-center distance between runway beams) charted below.'

Crane Comp Drawings and Spec CSL-1002-0407

b'For speeds over 100 fpm do not use single speed control. If using 2 speed control for speeds over 100 fpm include a soft start with the control. Drive Horsepower Requirements for US (short) Ton Cranes* Capacity (US Tons) Span (ft) Bridge Traverse Speed (fpm) 65 95 115 135 5 36 1/2 1/2 3/4 3/4 48 60 3/4 1 1 10 36 48 3/4 1 1-1/2 1-1/2 60'

Top Running Overhead Bridge Cranes - Hoosier Crane

b'By description a top running single girder bridge crane is a crane with end trucks that operate on fixed (ASCE or square bar) rails or tracks attached to the top flange of runway beams or girders. The hoists are of the under running type and ride on the lower flange of the bridge beam. 1 Ton, 2 Ton, 3 Ton and 4 Ton capacity Overhead Bridge Cranes.'